20 years of experienceIllustrative imageIn our clients' words, on Google
“I came to them on a recommendation, and it really was an excellent experience and careful work.”
5.0 from 30 Google reviews
What worries you before installation?
Hydraulic installation reaches deep into the building fabric, from the pit to the machine room. Poor pressure calibration costs you smooth travel; misrouted pipework becomes a leak later. The owner carries the consequences of those decisions for years.
Installation begins with measuring the shaft, pit depth and available space beside it for the machine room. The jack is fixed, the oil line run to the pump unit, cabin doors and guides fitted, then pressure is calibrated until starts and stops feel genuinely smooth.
Hydraulic jack pump and machine room covered
- Supplying the hydraulic jack and pump unit
- Fitting the machine room and hydraulic lines
- Installing the cabin, doors and guides
- Pressure setting and full operational test
Four stages from site visit to pump running
Tell us your location
Send the building location and number of floors by WhatsApp or a direct call.
Site visit before anything
Our engineer checks the pit and the space available for the machine room, then decides the right specifications.
Supply and installation
We supply the jack, pump and all components and install them according to what the site visit confirmed.
Testing and handover
We set the pressure, test starts and stops, and hand over a smoothly running lift with 2 years free warranty on the lift, covering spare parts and the periodic maintenance during that period.
From our work
Why us
We set the jack pressure only after every joint in the oil line is secure, so the cabin runs smoothly and leaks do not surface later.
- 13+ years
Lifts we installed that are still running, fault free.
- 300+
Clients served.
- 2 years free warranty
On the lift, covering spare parts and the periodic maintenance during that period.
20 year warranty on the lift machine.
Low-rise building hydraulic fit assessed on site
Two to four floor building
The hydraulic jack performs reliably across this range; the site visit confirms the exact specifications for your building.
Limited space above the shaft
The machine room sits beside the shaft, not above it, which helps where headroom above the shaft is restricted.
Existing building, retrofit project
The side-mounted machine room makes retrofitting feasible in many cases; the site visit assesses the structure and confirms whether it is possible.
Warranty and follow-up once the jack is live
First follow-up
- Pressure check after first use
- Operational review with the owner
- 20 year warranty on the lift machine
Ongoing care
- Scheduled pump servicing
- Hydraulic fluid level monitoring
- Parts replacement when needed
Buyer hesitations about hydraulic systems answered honestly
What decides the cost of hydraulic lift installation?
The pump unit position, cylinder depth, cabin specification and whether the building needs a dedicated machine room all shape the overall cost. A precise figure cannot be reached before inspecting the site, because every building presents its own structural conditions.
How long will the building or floors be disrupted during installation?
How long the building is affected depends on the complexity of the site and the civil works needed for the pit and machine room. The engineer can only give an accurate estimate after assessing the building.
Will installation cause dust or noise that disturbs residents?
Drilling and pipework bring dust and noise at certain stages. The extent depends on whether a shaft already exists or must be built, and the site visit maps out what civil work is actually needed.
What confirms that the hydraulic lift is reliable and safe for family or tenants once installation is complete?
Safety in a hydraulic lift rests on accurate pump pressure setting and testing every safety circuit before handover. Those tests are carried out and recorded at the end of every installation before the unit is released for use.
How can I tell whether a company genuinely knows hydraulic lift installation?
Ask how they handle side-mounted machine rooms and retrofit projects, and how they test pressure calibration and ride smoothness. A company that explains those details clearly before you sign understands what the job actually involves.
Related services
All our services
Questions about hydraulic elevator installation
Why does a hydraulic lift suit low-rise buildings specifically?
A hydraulic lift uses a jack that pushes the cabin from below, a design that performs reliably across two to four floors. For taller buildings another system may suit better, and the site visit makes that clear.
Does a hydraulic lift need a deep pit?
Not necessarily. Some hydraulic systems work with a shallow pit, but the depth required depends on the jack design and the floors served. Our engineer confirms this after the site visit.
Where does the machine room go in a hydraulic lift?
The machine room in a hydraulic lift is typically placed beside the shaft at ground or mezzanine level, not above the shaft as in some other systems. The exact arrangement depends on the space available at your site.
What does the start feel like in a hydraulic lift?
Hydraulic pressure builds gradually at the start of movement, giving a notably smooth departure and stop. Careful pressure calibration during installation is what delivers that quality.
Can a hydraulic lift be installed in an existing building that was not designed for one?
In many cases yes, because the machine room sits beside the shaft rather than above it, which gives more flexibility for retrofit projects. Whether it is feasible at your building depends on the structure and available space, and the site visit determines that.
What exactly does the engineer check during the site visit before a hydraulic lift installation?
The engineer measures the shaft dimensions, pit depth and space beside the shaft for the machine room, then determines the jack design, pump size and pipework routing that suit your specific site.
Do installation requirements differ between a villa and a small residential building?
Yes, cabin size, door configuration and machine room placement can all vary depending on the building type and how it is used. The initial site visit establishes what suits your particular case.
Hydraulic elevator installation in Riyadh, Al Kharj and Al Muzahimiyah
Book your pit and machine room assessment
Send your building type and the floors you need served by WhatsApp and we will confirm specifications after inspecting the site in person.