20 years of experienceIn our clients' words, on Google
“His work is flawless; he left nothing unrepaired.”
5.0 from 30 Google reviews
Is your lift disturbing the building?
A worn geared machine makes itself known: vibration felt underfoot, noise that carries to nearby flats, and faults that return at the worst moments. Each repair buys a little time but leaves the root cause untouched.
The technician inspects the existing machine and motor room, then identifies a gearless unit matched to the shaft dimensions and load design. The old motor is removed, the new one fitted and aligned, and movement is tested until the ride is smooth before handover.
Gearless machine parts the replacement covers
- Inspecting the existing machine on site
- Supplying a suitable gearless machine
- Installing and aligning the new motor
- Testing movement before handover
From assessment to the new machine running
Describe your lift
Tell us the lift type, number of floors and location by call or WhatsApp.
Site visit and assessment
Our technician inspects the existing machine and motor room to determine what the replacement must match.
We present the proposal
Based on the inspection we propose the right machine and explain exactly what installation and adjustment the job involves.
Installation and testing
We fit and align the new machine, then test movement until the ride is smooth and quiet before we hand over.
From our work
Why us
We align the new gearless machine to the exact shaft dimensions and test movement until every trace of the old motor's vibration is gone.
- 13+ years
Lifts we installed that are still running, fault free.
- 300+
Clients served.
- 2 years free warranty
On the lift, covering spare parts and the periodic maintenance during that period.
20 year warranty on the lift machine.
Is your old machine ready to be replaced?
A noisy, vibrating lift
An old geared machine is a common source of vibration and noise; a gearless unit often cures it, and the site visit confirms the source.
Low-rise building
Low-rise buildings are well suited to this replacement, though whether the gearless unit fits the shaft and motor room is confirmed at the site visit.
Fully worn-out motor
When a motor has passed its useful life and faults keep recurring, a full replacement is more practical than repeated repairs.
Follow up after your gearless machine is fitted
First follow-up
- Movement checked after first use
- Any residual vibration reviewed
- Alignment setting verified
Ongoing maintenance
- Periodic maintenance scheduled for the new machine
- Advance notice before each service visit
- Machine condition recorded at every visit
Honest answers before you replace the machine
What decides the cost of replacing the machine?
Cost depends on the replacement machine's specification, the condition and layout of the motor room, and what structural work the room needs. No accurate figure can be given until a technician has inspected the site, because every motor room presents its own constraints.
How long will the lift be taken out of use?
It varies with the machine type, motor room conditions and how easily equipment can be brought in. Some jobs are more straightforward than others, and we give a clear estimate after the site visit so you can plan ahead.
Will the work cause dust or noise in the building?
Disconnecting a worn machine and positioning a new one requires both manual handling and mechanical rigging inside the motor room. How much disruption this causes to the rest of the building depends on the room's position, its ventilation and the extent of the modifications required, all of which the technician evaluates during the site visit.
Is the building safe for residents while the machine is being changed?
Work is contained within the motor room and the lift remains out of service throughout installation. Before we start we explain the precautions taken and what you need to tell residents.
How do I know the technician is familiar with my existing machine?
Trust is built on the detail of the assessment, not on general promises. A technician who tells you precisely what he found, what the job involves and what could affect the outcome tells you more about competence than any marketing claim.
Related services
All our services
Questions about machine & motor replacement
Can every old lift take a gearless machine?
It depends on the machine room dimensions, the shaft design and the load the lift was built for. Some cases allow a direct swap while others need additional adjustments. The site visit gives the precise answer for your situation.
What is the practical difference between a geared and a gearless machine?
A geared machine uses a gearbox that creates friction, noise and needs regular oil. A gearless machine drives the sheave directly, so movement is quieter and smoother, energy use is lower, and there are fewer moving parts to wear out.
Does the lift have to stop completely during the machine replacement?
Yes, the lift is out of service during installation. How long that takes varies by machine type and how accessible the motor room is, and we will give you a clear estimate after the site visit.
What does the warranty on the new machine cover?
The warranty details for the new machine are explained when the agreement is made and depend on the machine chosen; we make sure you understand them before work begins.
Can the machine be replaced without changing the rest of the lift components?
In many cases the machine can be swapped while keeping the existing control panel, doors and cabin. Whether that is possible depends on how well the current components are compatible with the new machine, which the technician determines at the site visit.
Does a gearless machine need a specially sized motor room?
Gearless machines are generally more compact than geared ones, but exact motor room requirements vary by model. The site visit determines whether the existing room is sufficient or needs any modification.
How does the technician choose the right machine for my lift?
The choice is based on the site inspection findings: shaft and motor room dimensions, the load the lift was designed for, and the current cabin specifications. No single machine fits every case, which is why the initial visit matters.
Machine & motor replacement in Riyadh, Al Kharj and Al Muzahimiyah
Arrange an assessment of your current machine
Share the make of your current machine, the building type and its location; we inspect the machine room, then propose the replacement.