20 years of experienceIn our clients' words, on Google
“Their work is excellent, may God grant them success.”
5.0 from 30 Google reviews
What is a faulty lift door costing you?
Every time the door reopens without reason or refuses to close, residents and visitors either wait or avoid the lift altogether. Repeated noise unsettles neighbours, and a misaligned landing door can stop the lift running entirely, leaving one person to field every complaint.
The technician inspects the operator, drive gear, light curtain, roller hangers, guides and all landing doors. He identifies the part causing the fault, explains what needs to be done, carries out the repair and then tests the door repeatedly until it opens and closes smoothly and lines up with every sill.
Door mechanism parts addressed in the repair
- Door operator and drive gear
- Closing and safety sensors
- Door guides and roller hangers
- Landing doors and their alignment
Four steps from inspection to a closing door
Describe the problem
Tell us how the door behaves and which floor the fault occurs on, by WhatsApp or phone.
On-site inspection visit
The technician checks the operator, sensors and guides and pinpoints the exact fault before starting work.
We explain what needs fixing
We tell you which parts are affected and how we will fix them, and you approve before we begin.
Repair and verification
We fix the fault and test the door several times to confirm smooth operation and correct alignment with the floor.
From our work
Why us
We check the roller hangers and guides at every landing, because a single misaligned door can take the whole lift out of service.
- 13+ years
Lifts we installed that are still running, fault free.
- 300+
Clients served.
- 2 years free warranty
On the lift, covering spare parts and the periodic maintenance during that period.
20 year warranty on the lift machine.
Does your door fault fit this service?
Door stops mid-travel
The cause may lie in the operator, the guides or a loss of power in the circuit; the site visit determines which part is at fault.
Landing door sits uneven
A door sitting out of line with the sill prevents coupling with the car door and can often be corrected by adjusting the hangers rather than replacing the door.
Persistent noise on closing
Repeated noise points to worn roller hangers or dry guides and tends to worsen the longer the repair is delayed.
Monitoring door movement after the repair
Performance follow-up
- Movement checked after the repair
- Alert if wear is found elsewhere
- Guidance on what to watch yourself
Post-repair care
- Recommended guide lubrication schedule
- Condition check on remaining landing doors
- Contact available if the noise returns
Honest answers about lift door repairs
What decides the cost of a lift door repair?
The price depends on which part has failed; replacing a sensor differs from replacing a full operator or worn roller hangers. Some faults reveal additional damage once inspection begins. The site visit is what determines the scope and the actual cost.
Will the lift be completely out of service during the repair?
It depends on where the fault lies. A sensor or adjustment issue may need only brief downtime, while an operator or landing door fault can require taking the lift out of service for safety. The technician tells you clearly after the inspection.
Will the door repair cause dust or disruptive noise in the building?
Door work generally requires no drilling or cutting into walls, so dust is minimal. Some noise is expected during testing and operator adjustment, but it is limited to the time the work is in progress. The site visit gives a clearer picture for each specific case.
Is the repair safe for residents while work is under way?
Safety is assessed once the fault type is clear. If the repair touches safety circuits or the coupling mechanism, the lift is taken out of service until the work is complete. The technician does not start until that decision is made and communicated to you.
What tells me your technicians can diagnose a door fault correctly the first time?
A technician who diagnoses the fault accurately before touching anything, explains the reason for each step, and tells you whether parts are available or need sourcing gives you the clearest measure of how well he knows door faults.
Related services
All our services
Questions about elevator door repair
Why does the lift door keep reopening for no clear reason?
The usual causes are a door edge sensor or light curtain receiving a false signal, or the door not reaching its full closed position because of a fault in the operator or a shift in the guides. The first visit identifies the real source.
Can a misaligned landing door be corrected without replacing it?
In many cases adjusting the hangers, guides and frame alignment is enough without replacing the door. Whether replacement is necessary only becomes clear after inspecting the parts on site.
What causes a metallic noise when the lift door moves?
The noise usually comes from worn roller hangers, guides that have dried out or bent, or loose parts in the operator. Leaving it unattended increases wear and extends the damage.
Do you repair doors on lifts from different manufacturers?
Yes, though the work varies between makes and models. After inspection the technician confirms whether the parts needed are available straight away or require sourcing, and tells you before proceeding.
Can a fault on one floor's landing door affect the doors on other floors?
Sometimes yes, because the car operator drives all landing doors through a coupling mechanism. A fault in the operator or sensors can affect multiple floors. The on-site inspection shows the full extent of the problem.
Can the door be repaired while the lift is still partially in use?
It depends on the nature and location of the fault. Some repairs require the lift to be taken out of service entirely for safety reasons, and the technician confirms this after the initial on-site inspection.
Are spare parts available for older lift doors that have been in use for many years?
Parts availability varies according to the door type and operator model. The technician checks the specifications on site and tells you whether parts are ready to hand or need to be sourced before work can continue.
Elevator door repair in Riyadh, Al Kharj and Al Muzahimiyah
Describe how the faulty door behaves
Send a photo or short clip showing how the door behaves, tell us the floor, and we will arrange a site inspection and then explain exactly what needs to be done.